https://wiki.nhrl.io/wiki/api.php?action=feedcontributions&feedformat=atom&user=Ccollins 2026-04-28T09:59:32Z User contributions MediaWiki 1.41.1 https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12181 2024-01-10T05:25:34Z

<p>Ccollins: Goddamn spacing bro</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|thumb|400x400px|&quot;Ran when parked&quot;]]<br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px|none]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]] <br /> [[File:Kickstart-post-may2.jpg|thumb|507x507px|Kickstart after NHRL May 2023|alt=|none]] <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly |alt=]] <br /> [[File:Kickstart Weapon Pod.jpg|alt=|thumb|400x400px|Kickstart Weapon Pods|none]]<br /> &lt;p&gt;<br /> &lt;p&gt;<br /> Kickstart received a weapon and chassis system update for the NHRL November Finals event. The result was a stronger weapon assembly and improved weight distribution. This was also the first introduction of the minibot, Sidekick. <br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> <br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12180 2024-01-10T05:22:49Z

<p>Ccollins: </p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]]&lt;br&gt;<br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]]&lt;br&gt; <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]]&lt;br&gt; <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]]&lt;br&gt; <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]]&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;<br /> &lt;p&gt;<br /> &lt;p&gt;<br /> &lt;p&gt;<br /> &lt;p&gt;<br /> &lt;p&gt;<br /> &lt;p&gt;<br /> Kickstart received a weapon and chassis system update for the NHRL November Finals event. The result was a stronger weapon assembly and improved weight distribution. This was also the first introduction of the minibot, Sidekick. <br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> <br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12179 2024-01-10T05:16:15Z

<p>Ccollins: Updated</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]]&lt;br&gt;<br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]]&lt;br&gt; <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]]&lt;br&gt; <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]]&lt;br&gt; <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]]&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> Kickstart received a weapon and chassis system update for the NHRL November Finals event. The result was a stronger weapon assembly and improved weight distribution. This was also the first introduction of the minibot, Sidekick. <br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> <br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12178 2024-01-10T05:15:48Z

<p>Ccollins: Updated spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]]&lt;br&gt;<br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]]&lt;br&gt; <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]]&lt;br&gt; <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]]&lt;br&gt; <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]]&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> Kickstart received a weapon and chassis system update for the NHRL November Finals event. The result was a stronger weapon assembly and improved weight distribution. This was also the first introduction of the minibot, Sidekick. <br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> <br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12177 2024-01-10T05:13:04Z

<p>Ccollins: Spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]]&lt;br&gt;<br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]]&lt;br&gt; <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]]&lt;br&gt; <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]]&lt;br&gt; <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]]&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> <br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12176 2024-01-10T05:12:32Z

<p>Ccollins: Spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]]&lt;br&gt;<br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]]&lt;br&gt; <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]]&lt;br&gt; <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]]&lt;br&gt; <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]]&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> HTML is hard...<br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> <br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12175 2024-01-10T05:11:57Z

<p>Ccollins: Spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]]&lt;br&gt;<br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]]&lt;br&gt; <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]]&lt;br&gt; <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]]&lt;br&gt; <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]]&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot;<br /> |+<br /> !<br /> !<br /> !<br /> !<br /> |-<br /> |<br /> |<br /> |<br /> |<br /> |-<br /> |<br /> |<br /> |<br /> |<br /> |-<br /> |<br /> |<br /> |<br /> |<br /> |}<br /> <br /> <br /> <br /> Yes<br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> <br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12174 2024-01-10T05:11:28Z

<p>Ccollins: Spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]]&lt;br&gt;<br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]]&lt;br&gt; <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]]&lt;br&gt; <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]]&lt;br&gt; <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]]&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> Yes<br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> <br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12173 2024-01-10T05:10:33Z

<p>Ccollins: Spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]]&lt;br&gt;<br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]]&lt;br&gt; <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]]&lt;br&gt; <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]]&lt;br&gt; <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]]&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot;<br /> |+<br /> !<br /> <br /> <br /> !<br /> !<br /> !<br /> |-<br /> |<br /> |<br /> |<br /> |<br /> |-<br /> |<br /> |<br /> |<br /> |<br /> |-<br /> |<br /> |<br /> |<br /> |<br /> |}<br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> <br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12172 2024-01-10T05:09:57Z

<p>Ccollins: Spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]]&lt;br&gt;<br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]]&lt;br&gt; <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]]&lt;br&gt; <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]]&lt;br&gt; <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]]&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot;<br /> |+<br /> !<br /> !<br /> !<br /> !<br /> |-<br /> |<br /> |<br /> |<br /> |<br /> |-<br /> |<br /> |<br /> |<br /> |<br /> |-<br /> |<br /> |<br /> |<br /> |<br /> |}<br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> <br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12171 2024-01-10T05:07:42Z

<p>Ccollins: </p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]]&lt;br&gt;<br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]]&lt;br&gt; <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]]&lt;br&gt; <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]]&lt;br&gt; <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]]&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;<br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> <br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12170 2024-01-10T05:01:39Z

<p>Ccollins: Spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]] <br /> <br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]][[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]] <br /> <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]] <br /> <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]] <br /> <br /> <br /> <br /> <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> <br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12169 2024-01-10T04:59:48Z

<p>Ccollins: Spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]] <br /> <br /> <br /> <br /> [[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]] <br /> <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]] <br /> <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]] <br /> <br /> <br /> <br /> <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]] <br /> <br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> <br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12168 2024-01-10T04:59:11Z

<p>Ccollins: Updated spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]] <br /> <br /> <br /> <br /> [[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]] <br /> <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]] <br /> <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]] <br /> <br /> <br /> <br /> <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]] <br /> <br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> <br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12167 2024-01-10T04:58:33Z

<p>Ccollins: Updated spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.<br /> <br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]] <br /> <br /> <br /> <br /> [[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]] <br /> <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]] <br /> <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]] <br /> <br /> <br /> <br /> <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]] <br /> <br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]]<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> <br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=12166 2024-01-10T04:57:32Z

<p>Ccollins: Added additional images of new Kickstart</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRL November 2023.jpg|thumb|640x640px|Kickstart at NHRL November 2023]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement.<br /> <br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented.[[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]] <br /> <br /> <br /> <br /> [[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|563x563px]] <br /> <br /> [[File:Kickstart-post-may2.jpg|left|thumb|507x507px|Kickstart after NHRL May 2023]] <br /> <br /> [[File:Kickstart Weapon Finals Revision.jpg|thumb|443x443px|Kickstart Redesigned Weapon Assembly ]] <br /> <br /> <br /> <br /> <br /> [[File:Kickstart Weapon Pod.jpg|alt=|left|thumb|400x400px|Kickstart Weapon Pods]] <br /> <br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|451x451px]] <br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> <br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart_Weapon_Pod.jpg&diff=12165 2024-01-10T04:48:19Z

<p>Ccollins: </p> <hr /> <div>Kickstart's Modular Weapon Pod</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart_Weapon_Finals_Revision.jpg&diff=12164 2024-01-10T04:45:52Z

<p>Ccollins: </p> <hr /> <div>Kickstart Weapon</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart_Weapon_Rev2.jpg&diff=12163 2024-01-10T04:44:42Z

<p>Ccollins: </p> <hr /> <div>Kickstart Weapon</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:NHRL_November_2023.jpg&diff=12162 2024-01-10T04:40:57Z

<p>Ccollins: </p> <hr /> <div>Image of Kickstart before the NHRL November 2023 finals event.</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=8627 2023-05-20T03:54:27Z

<p>Ccollins: </p> <hr /> <div>===Robot Facts===<br /> [[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|400x400px]]<br /> <br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]] <br /> <br /> <br /> <br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement. <br /> <br /> <br /> <br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|400x400px]] [[File:Kickstart-post-may2.jpg|left|thumb|400x400px|Kickstart after NHRL May 2023]] <br /> <br /> <br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented. {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> <br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=8626 2023-05-20T03:53:18Z

<p>Ccollins: Updated spacing</p> <hr /> <div>===Robot Facts===<br /> [[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|400x400px]]<br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]] <br /> <br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement. <br /> <br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|400x400px]] [[File:Kickstart-post-may2.jpg|left|thumb|400x400px|Kickstart after NHRL May 2023]] <br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented. {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=8625 2023-05-20T03:51:32Z

<p>Ccollins: Added more pictures, updated paragraph content</p> <hr /> <div>===Robot Facts===<br /> [[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023|alt=|400x400px]]<br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> [[File:Kickstart-hub-broken-cropped.jpg|alt=|left|thumb|400x400px|&quot;Ran when parked&quot;]] <br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement. <br /> [[File:Kickstart-old.jpg|thumb|OG Kickstart|alt=|400x400px]] <br /> <br /> [[File:Kickstart-post-may2.jpg|left|thumb|400x400px|Kickstart after NHRL May 2023]] <br /> <br /> After taking a few years break, Kickstart was redesigned as a 4WD vertical spinner to fully complete the meta transition. Kickstart competed at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet can be modularly attached to the front of the robot. For the January event, and TPU wedge was used against horizontal spinners. For the May event, weight was reallocated to allow for a 1/16&quot; titanium wedge to be implemented. <br /> <br /> <br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> [[File:Kickstart-weapon-modules.jpg|thumb|Weapon Modules|alt=|left|400x400px]]<br /> [[File:Kickstart-jan-abomination.jpg|thumb|Ouch|alt=|left|533x533px]]<br /> [[File:Kickstart-jan-wedge-cropped.jpg|alt=|left|thumb|400x400px|WEJ]]<br /> [[File:Kickstart-wheels-jan-cropped.jpg|left|thumb|400x400px|Onyx Hub, Vytaflex 60 Wheel ]]<br /> [[File:Kickstart-wheels-may.jpg|left|thumb|400x400px|Nylon G Hub, Vytaflex 30 Wheel]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-hub-broken-cropped.jpg&diff=8624 2023-05-20T03:45:27Z

<p>Ccollins: </p> <hr /> <div>Broken Weapon Hub</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-wheels-may.jpg&diff=8623 2023-05-20T03:41:14Z

<p>Ccollins: </p> <hr /> <div>Wheelz</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-wheels-jan-cropped.jpg&diff=8622 2023-05-20T03:40:11Z

<p>Ccollins: </p> <hr /> <div>Onyx Hub, Vytaflex 60 Wheel</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-jan-wedge-cropped.jpg&diff=8621 2023-05-20T03:39:14Z

<p>Ccollins: </p> <hr /> <div>WEJ</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-wheels-jan.jpg&diff=8620 2023-05-20T03:34:10Z

<p>Ccollins: </p> <hr /> <div>Wheelz</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-post-may2.jpg&diff=8619 2023-05-20T03:33:31Z

<p>Ccollins: </p> <hr /> <div>Kickstart after NHRL May 2023</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=8618 2023-05-20T02:23:48Z

<p>Ccollins: Added pictures and paragraphs</p> <hr /> <div>===Robot Facts===<br /> [[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023]]<br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || eBay 2838 Inrunner<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 4S Lipo<br /> |}<br /> [[File:Kickstart-hub-broken.jpg|thumb|&quot;Ran when parked&quot;]]<br /> Kickstart is a beetleweight combat robot that has competed in various events in the Northeastern United States since September 2017. The design originally began as a 2WD vertical spinner with a custom wound hub motor from a copy machine. The weapon consisted of a machined AR500 disk clamped between two aluminum hubs, and the frame was machined out of a single piece of aluminum. An 1/8&quot; thick titanium wedge guarded the front of the robot, along with 1/2&quot; thick UHMW armor. The design featured a fearsome weapon, but had several vulnerabilities including erratic driving induced by gyroscopic precession, poor acceleration due to drivetrain belt slip, lack of a ground game, and the inability to drive inverted or self right. The robot competed with the intention of delivering a few big hits, but was never competitive. Near the end of its career, the original design experienced several failures related to the hub motor weapon. Some of the notable issues included bolt slip on large hits, bearing seizure, and magnet dislodgement. <br /> [[File:Kickstart-old.jpg|left|thumb|OG Kickstart]]<br /> After taking a few years break, Kickstart was redesigned to compete at the January 2023 NHRL New Bots Event. The new Kickstart features a monocoque TPU chassis with custom molded Vytaflex wheels. An aluminum weapon module is designed to snap into the frame, and wedgelet attachments can be modularly attached to the front of the robot. <br /> <br /> <br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> [[File:Kickstart-post-may.jpg|thumb|Kickstart after NHRL May 2023]]<br /> [[File:Kickstart-weapon-modules.jpg|none|thumb|Weapon Modules]]<br /> [[File:Kickstart-jan-abomination.jpg|none|thumb|Ouch]]<br /> [[File:Kickstart-jan-wedge.jpg|thumb|WEJ]]<br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-may.png&diff=8617 2023-05-20T01:54:38Z

<p>Ccollins: Uploaded own work with UploadWizard</p> <hr /> <div>=={{int:filedesc}}==<br /> {{Information<br /> |description={{en|1=Kickstart at NHRL May 2023}}<br /> |date=2023-05-06<br /> |source={{own}}<br /> |author=[[User:Ccollins|Ccollins]]<br /> |permission=<br /> |other versions=<br /> }}<br /> <br /> =={{int:license-header}}==<br /> {{self|cc-by-sa-4.0}}<br /> <br /> This file was uploaded with the UploadWizard extension.<br /> <br /> [[Category:Uploaded with UploadWizard]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-weapon-modules.jpg&diff=8616 2023-05-20T01:54:37Z

<p>Ccollins: Uploaded own work with UploadWizard</p> <hr /> <div>=={{int:filedesc}}==<br /> {{Information<br /> |description={{en|1=Kickstart Weapon Modules}}<br /> |date=2023-05-01 23:43:53<br /> |source={{own}}<br /> |author=[[User:Ccollins|Ccollins]]<br /> |permission=<br /> |other versions=<br /> }}<br /> {{Location|42.895256|-71.5664|heading:60.98468019915741}}<br /> <br /> =={{int:license-header}}==<br /> {{self|cc-by-sa-4.0}}<br /> <br /> This file was uploaded with the UploadWizard extension.<br /> <br /> [[Category:Uploaded with UploadWizard]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-post-may.jpg&diff=8615 2023-05-20T01:54:37Z

<p>Ccollins: Uploaded own work with UploadWizard</p> <hr /> <div>=={{int:filedesc}}==<br /> {{Information<br /> |description={{en|1=Kickstart after NHRL May 2023}}<br /> |date=2023-05-08 22:11:00<br /> |source={{own}}<br /> |author=[[User:Ccollins|Ccollins]]<br /> |permission=<br /> |other versions=<br /> }}<br /> {{Location|42.895261|-71.5664|heading:143.95861807137433}}<br /> <br /> =={{int:license-header}}==<br /> {{self|cc-by-sa-4.0}}<br /> <br /> This file was uploaded with the UploadWizard extension.<br /> <br /> [[Category:Uploaded with UploadWizard]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-old.jpg&diff=8614 2023-05-20T01:54:37Z

<p>Ccollins: Uploaded own work with UploadWizard</p> <hr /> <div>=={{int:filedesc}}==<br /> {{Information<br /> |description={{en|1=Kickstart in September 2018}}<br /> |date=2018-09-22 11:04:03<br /> |source={{own}}<br /> |author=[[User:Ccollins|Ccollins]]<br /> |permission=<br /> |other versions=<br /> }}<br /> <br /> =={{int:license-header}}==<br /> {{self|cc-by-sa-4.0}}<br /> <br /> This file was uploaded with the UploadWizard extension.<br /> <br /> [[Category:Uploaded with UploadWizard]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-hub-broken.jpg&diff=8613 2023-05-20T01:54:36Z

<p>Ccollins: Uploaded own work with UploadWizard</p> <hr /> <div>=={{int:filedesc}}==<br /> {{Information<br /> |description={{en|1=Ran When Parked}}<br /> |date=2018-09-25 14:22:38<br /> |source={{own}}<br /> |author=[[User:Ccollins|Ccollins]]<br /> |permission=<br /> |other versions=<br /> }}<br /> <br /> =={{int:license-header}}==<br /> {{self|cc-by-sa-4.0}}<br /> <br /> This file was uploaded with the UploadWizard extension.<br /> <br /> [[Category:Uploaded with UploadWizard]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-jan-wedge.jpg&diff=8612 2023-05-20T01:54:36Z

<p>Ccollins: Uploaded own work with UploadWizard</p> <hr /> <div>=={{int:filedesc}}==<br /> {{Information<br /> |description={{en|1=TPU WEJ}}<br /> |date=2023-01-28 09:46:16<br /> |source={{own}}<br /> |author=[[User:Ccollins|Ccollins]]<br /> |permission=<br /> |other versions=<br /> }}<br /> {{Location|41.097228|-73.415878|heading:65.59770204176694}}<br /> <br /> =={{int:license-header}}==<br /> {{self|cc-by-sa-4.0}}<br /> <br /> This file was uploaded with the UploadWizard extension.<br /> <br /> [[Category:Uploaded with UploadWizard]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart-jan-abomination.jpg&diff=8611 2023-05-20T01:54:36Z

<p>Ccollins: Uploaded own work with UploadWizard</p> <hr /> <div>=={{int:filedesc}}==<br /> {{Information<br /> |description={{en|1=Damage from Abomination}}<br /> |date=2023-01-28 19:00:10<br /> |source={{own}}<br /> |author=[[User:Ccollins|Ccollins]]<br /> |permission=<br /> |other versions=<br /> }}<br /> {{Location|41.095903|-73.411842|heading:337.27944969905417}}<br /> <br /> =={{int:license-header}}==<br /> {{self|cc-by-sa-4.0}}<br /> <br /> This file was uploaded with the UploadWizard extension.<br /> <br /> [[Category:Uploaded with UploadWizard]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=STF&diff=8357 2023-04-23T23:45:26Z

<p>Ccollins: Uploaded new picture</p> <hr /> <div>===Robot Facts===<br /> [[File:STF.png|alt=|thumb|STF (March 2023)]]<br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Nick Sorensen<br /> |-<br /> | Pit Crew || David Jin, Madison Healey, Cam Collins<br /> |-<br /> | Weight Class || [[30lb Weight Class|30lb]]<br /> |-<br /> | Body Material || Aluminum<br /> |-<br /> | Weapon || Horizontal Spinner<br /> |-<br /> | Weapon Drive || Custom IPM <br /> |-<br /> | Drive || Shuffler<br /> |-<br /> | Power || 7 kW<br /> |}<br /> <br /> {{Bot Stats|bot=STF|class=30lb}}<br /> <br /> == Select Fights ==<br /> Video links coming soon!<br /> <br /> <br /> [[Category:30lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:STF.png&diff=8356 2023-04-23T23:44:39Z

<p>Ccollins: </p> <hr /> <div>STF (March 2023)</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=STF&diff=8241 2023-04-02T14:01:44Z

<p>Ccollins: </p> <hr /> <div>===Robot Facts===<br /> [[File:Stf-30lb-may22.png|alt=|thumb|STF (May 2022)]]<br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Nick Sorensen<br /> |-<br /> | Pit Crew || David Jin, Madison Healey, Cam Collins<br /> |-<br /> | Weight Class || [[30lb Weight Class|30lb]]<br /> |-<br /> | Body Material || Aluminum<br /> |-<br /> | Weapon || Horizontal Spinner<br /> |-<br /> | Weapon Drive || Custom IPM <br /> |-<br /> | Drive || Shuffler<br /> |-<br /> | Power || 7 kW<br /> |}<br /> <br /> {{Bot Stats|bot=STF|class=30lb}}<br /> <br /> == Select Fights ==<br /> Video links coming soon!<br /> <br /> <br /> [[Category:30lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=STF&diff=8240 2023-04-02T13:14:48Z

<p>Ccollins: </p> <hr /> <div>===Robot Facts===<br /> [[File:Stf-30lb-may22.png|alt=|thumb|STF (May 2022)]]<br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Nick Sorensen<br /> |-<br /> | Pit Crew || David Jin, Madison Healey, Cam Collins<br /> |-<br /> | Weight Class || [[30lb Weight Class|30lb]]<br /> |-<br /> | Body Material || Aluminum<br /> |-<br /> | Weapon || Horizontal Spinner<br /> |-<br /> | Weapon Drive || Custom IPM <br /> |-<br /> | Drive || Shuffler<br /> |-<br /> | Power || 15 kW<br /> |}<br /> <br /> {{Bot Stats|bot=STF|class=30lb}}<br /> <br /> == Select Fights ==<br /> Video links coming soon!<br /> <br /> <br /> [[Category:30lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=7892 2023-02-02T03:31:15Z

<p>Ccollins: /* Robot Facts */</p> <hr /> <div>===Robot Facts===<br /> [[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023]]<br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder/Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || Propdrive 2836<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 2X 2S Lipos in Series <br /> |}<br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> Kickstart<br /> <br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=7891 2023-02-02T03:22:48Z

<p>Ccollins: /* Robot Facts */</p> <hr /> <div>===Robot Facts===<br /> [[File:Kickstart 01 28 23.png|thumb|Kickstart at NHRL January 2023]]<br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder || Cam Collins<br /> |-<br /> | Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || Propdrive 2836<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 2X 2S Lipos in Series <br /> |}<br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> Kickstart<br /> <br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=File:Kickstart_01_28_23.png&diff=7890 2023-02-02T03:21:29Z

<p>Ccollins: Uploaded own work with UploadWizard</p> <hr /> <div>=={{int:filedesc}}==<br /> {{Information<br /> |description={{en|1=Kickstart at NHRL January 2023}}<br /> |date=2023-01-28<br /> |source={{own}}<br /> |author=[[User:Ccollins|Cam Collins]]<br /> |permission=<br /> |other versions=<br /> }}<br /> <br /> =={{int:license-header}}==<br /> {{self|cc-by-sa-4.0}}<br /> <br /> This file was uploaded with the UploadWizard extension.<br /> <br /> [[Category:Robot Pictures]]<br /> [[Category:Uploaded with UploadWizard]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=7889 2023-02-02T01:39:19Z

<p>Ccollins: /* Robot Facts */</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRLScanLines.png|30%px|thumb|right|Image coming soon!]]<br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder || Cam Collins<br /> |-<br /> | Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || Propdrive 2836<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 2X 2S Lipos in Series <br /> |}<br /> <br /> {{Bot Stats|bot=Kickstart|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> Kickstart<br /> <br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins https://wiki.nhrl.io/wiki/index.php?title=Kickstart&diff=7888 2023-02-02T01:36:51Z

<p>Ccollins: Created page with &quot;===Robot Facts=== Image coming soon! {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot; |- | Builder || Cam Collins |- | Driver || Cam Colli...&quot;</p> <hr /> <div>===Robot Facts===<br /> [[File:NHRLScanLines.png|30%px|thumb|right|Image coming soon!]]<br /> {| class=&quot;wikitable&quot; style=&quot;width: 60%&quot;<br /> |-<br /> | Builder || Cam Collins<br /> |-<br /> | Driver || Cam Collins<br /> |-<br /> | Weight Class || [[3lb Weight Class|3lb]]<br /> |-<br /> | Body Material || TPU &amp; Aluminum<br /> |-<br /> | Weapon || Vertical Spinner<br /> |-<br /> | Weapon Drive || Propdrive 2836<br /> |-<br /> | Drive || 4WD Rectified Robotics Brushless Drive Kit<br /> |-<br /> | Power || 2X 2S Lipos in Series <br /> |}<br /> <br /> {{Bot Stats|bot=New_Bot|class=3lb}}<br /> <br /> == Select Fights ==<br /> Video links Coming Soon!<br /> <br /> == Gallery ==<br /> Kickstart<br /> <br /> [[Category:3lb Bots]][[Category:NHRL 2022]]</div>

Ccollins