View source for NHRL Facilities

== Overview ==
The staff here work hard to make the permanent home of NHRL, 165 Water Street, as well-equipped and inviting as possible for all competitors. Here is some information regarding our facilities available for competitors.

Feeling a bit lost? Here's a handy [[NHRL Building Map|map of the facility]]!

''Did you know? NHRL is actually open more than just during events! Our staff are here 5 days a week. If you want to come in and test a bot, use our tools, or get some help, [mailto:hello@nhrl.io please email us!]''<gallery mode="slideshow">
File:3lb front.jpg|The NHRL 3lb cages, seen from the bleachers
File:Nhrl 30lb front.jpg|The NHRL 30lb box, as seen from the bleachers
File:Nhrl 3lb back.jpg|The 3lb cages at NHRL
File:Nhrl merch.jpg|The merch table at NHRL
File:Nhrl green room 2.jpg|The NHRL Green Room
File:Nhrl green room.jpg|The NHRL Green Room
File:30lb cage back.jpg|The back of the NHRL 30lb cage
File:Nhrl lounge.jpg|The NHRL lounge for spectators
File:Nhrl 30lb cage.jpg|The interior of the 30lb cage at NHRL
File:Nhrl shop.jpg|The welding shop at NHRL
File:Nhrl pits 2.jpg|The pits at NHRL
</gallery>

== Cages & Test Boxes ==
More detailed information about the arenas and their design can be be found on the [[Cage Design]] page.[[File:Brett in the Arena.jpg|thumb|NHRL 3lb Arena with house bot [[Brett the Brick]]]]

==== Cages 1 and 4 - 12lb & 30lb ====
* 16'x 16' Double walled, shock mounted 1/2" Polycarbonate
* Wooden arena floor painted with [[:File:BEHR Paint.jpg|Dead Flat Paint]]
* Wooden trim backed by steel and wooden roof
* 2000 CFM Negative pressure system
* [[Brett the Brick|Fluffy]]; 300lb house robot with HD camera

==== Cages 2, 3, and 5 - 3lb ====
* 8'x 8' Double Walled Polycarbonate
* Wooden arena floor painted with [[:File:BEHR Paint.jpg|Dead Flat Paint]]
* Wooden trim backed by steel and wooden roof
* 2000 CFM Negative pressure system
* [[Brett the Brick]] 60lb Steel Brick with HD Camera

==== 3lb Test Boxes ====
* 4 available for competitor use

==== 12lb / 30lb Test Box ====
* 2 available for competitor use

== Pits ==
[[File:Nhrl pits.jpg|alt=|thumb|Pits at NHRL]]
Every competing team is provided with pit space at NHRL. This gives you room to charge batteries, repair your robot, make last minute changes, etc. Pit locations are first come, first serve. Pits are generally available both outside and inside. The pit environment can be a little chaotic at times but is always friendly and cooperative. Bot builders help each other when they can to so that everyone is ready to fight. For many competitors, time spent hanging out in the pits is as fun as competing. 

=== What is Included ===

* 6ft Folding table
* Power strip with 3 outlets
* At least one folding chair
* High quality WIFI

=== What should I bring ===

* A good attitude
* Battery Charger
* Spare parts
* Anything you need to repair your bot. Also doesn't hurt to bring parts to help others.

==Green Room==
The Green Room is an area where competitors who are in the next 10 fights to wait until they are called to the cage. This area features comfy seating, large TVs to watch the fights on, and tables to place your bots and charge up spare batteries.

== Workshop & Machine Shop ==
For last-minute repairs, the NHRL machine shop and workshop are both open for use by competitors. If you need help or do not know how to safely operate a tool, NHRL workshop staff would be happy to assist.

Please note that while we will try to help you as much as we can, you should arrive with your bot fully operating! We do not have the facilities or the time to help overhaul a robot before fights.

=== Workshop Equipment ===

* Hand Tools (screwdrivers, Allen Keys, pliers, scissors, etc.)
* Power Tools (cordless drills, impact guns, Dremels, Sawzalls, angle grinder, etc.)
* Benchtop Tools (chop saw, bandsaw, bench vise, etc.)
* Welding equipment - for use by trained staff only
** Lincoln Electric Precision TIG 225
** Hobart IronMan 240 MIG
* Assorted metric and SAE hardware

=== Machine Shop ===
NHRL has a basic machine shop available for competitors to do basic repairs day-of. If you do not know how to use a tool, please ask a member of the shop staff. 

Current available equipment includes:

==== Drill Press ====

* Shanks up to 1/2"
* Vertical quill travel >5"
* Table height adjustment >24"

==== Metal Bandsaw ====

* Recommended for stock <3/4"
* Maximum Throat <12"

==== Mini Lathe ====

* Maximum Throw: 7"
* Maximum Length: 12"
* Spindle RPM: 50-1200

==== Mini Mill ====

* 6" Machinist's Vise
* Power travel in X axis
* Spindle RPM: 100-2400

==== Tormach 1100MX ====

* 8" Machinist's Vise
* Spindle RPM: 50-10000
* Positional 4th Axis & Lathe 4th Axis 
* Volume: 18 x 11 x 16.25 in
* Automatic Tool Changing and Probing