Razor Storm
From NHRL
Razor Storm is a Vertical Spinner and Lifter 3lb Robot. It borrows many components from its predecessor ProtoStorm, including the blade and much of the chassis. Most of the bot is hand-machined save for the blade and pulley.
Razor Storm gains a new paint stripe every competition.
- Razor Storm V1.1: The original Razor Storm had one aluminum wedgelet. Only one lifting arm was connected to the servo, the second was connected by two pieces of Garolite. It had an alternative "light" configuration that replaced the wheel guards with smaller front shields.
- Razor Storm V1.2: The next version had both lifting arms attached to the servo via a bracket and had no Garolite pieces connecting them.
- Razor Storm V1.3: For the finals, Razor Storm brought stronger lifting arms and a long UHMW wedgelet in place of the old aluminum one. It also brought an alternate configuration with "keep-away sticks" instead of forks on the arms. This was specifically designed to fight Billy.
Robot Facts
| Driver | Jamie Reilly |
| Weight Class | 3lb |
| Body Material | UHMW, Polycarbonate, Garolite |
| Weapon | Vertical Spinner & Lifter |
| Weapon Drive | Brushless Inrunner |
| Drive | Brushed Gear Motor |
| Power | 850 Mah 4S Lipo |
Tournament Results
2020
| NHRL January 18th 2020 | Did Not Compete |
| NHRL July 18th 2020 | Did Not Compete |
| NHRL July 19th 2020 | Did Not Compete |
| NHRL September 19th 2020 | 3 Wins - 2 Losses |
| NHRL November 21st 2020 | 0 Wins - 2 Losses |
Combat History
- Fifth/Sixth Place - NHRL September 19th 2020
