NHRL Facilities
Overview
The staff here work hard to make the permanent home of NHRL, 165 Water Street, as well-equipped and inviting as possible for all competitors. Here is some information regarding our facilities available for competitors.
Feeling a bit lost? Here's a handy map of the facility!
Did you know? NHRL is actually open more than just during events! Our staff are here 5 days a week. If you want to come in and test a bot, use our tools, or get some help, please email us!
-
The NHRL 3lb cages, seen from the bleachers
-
The NHRL 30lb box, as seen from the bleachers
-
The 3lb cages at NHRL
-
The merch table at NHRL
-
The NHRL Green Room
-
The NHRL Green Room
-
The back of the NHRL 30lb cage
-
The NHRL lounge for spectators
-
The interior of the 30lb cage at NHRL
-
The welding shop at NHRL
-
The pits at NHRL
Cages & Test Boxes
More detailed information about the arenas and their design can be be found on the Cage Design page.
Cages 1 and 4 - 12lb & 30lb
- 16'x 16' Double walled, shock mounted 1/2" Polycarbonate
- Wooden arena floor painted with Dead Flat Paint
- Wooden trim backed by steel and wooden roof
- 2000 CFM Negative pressure system
- Fluffy; 300lb house robot with HD camera
Cages 2, 3, and 5 - 3lb
- 8'x 8' Double Walled Polycarbonate
- Wooden arena floor painted with Dead Flat Paint
- Wooden trim backed by steel and wooden roof
- 2000 CFM Negative pressure system
- Brett the Brick 60lb Steel Brick with HD Camera
3lb Test Boxes
- 4 available for competitor use
12lb / 30lb Test Box
- 1 available for competitor use
Pits
Every competing team is provided with pit space at NHRL. This gives you room to charge batteries, repair your robot, make last minute changes, etc. Pit locations are first come, first serve. Pits are generally available both outside and inside. The pit environment can be a little chaotic at times but is always friendly and cooperative. Bot builders help each other when they can to so that everyone is ready to fight. For many competitors, time spent hanging out in the pits is as fun as competing.
What is Included
- 6ft Folding table
- Power strip with 3 outlets
- At least one folding chair
- High quality WIFI
What should I bring
- A good attitude
- Battery Charger
- Spare parts
- Anything you need to repair your bot. Also doesn't hurt to bring parts to help others.
Green Room
The Green Room is an area where competitors who are in the next 10 fights to wait until they are called to the cage. This area features comfy seating, large TVs to watch the fights on, and tables to place your bots and charge up spare batteries.
Workshop & Machine Shop
For last-minute repairs, the NHRL machine shop and workshop are both open for use by competitors. If you need help or do not know how to safely operate a tool, NHRL workshop staff would be happy to assist.
Please note that while we will try to help you as much as we can, you should arrive with your bot fully operating! We do not have the facilities or the time to help overhaul a robot before fights.
Workshop Equipment
- Hand Tools (screwdrivers, Allen Keys, pliers, scissors, etc.)
- Power Tools (cordless drills, impact guns, Dremels, Sawzalls, angle grinder, etc.)
- Benchtop Tools (chop saw, bandsaw, bench vise, etc.)
- Welding equipment - for use by trained staff only
- Lincoln Electric Precision TIG 225
- Hobart IronMan 240 MIG
- Assorted metric and SAE hardware
Machine Shop
The machine shop at NHRL is currently undergoing renovations, that are expected to be completed in late October.
NHRL has a basic machine shop available for competitors to do basic repairs day-of. If you do not know how to use a tool, please ask a member of the shop staff.
Current available equipment includes:
Drill Press
- Shanks up to 1/2"
- Vertical quill travel >5"
- Table height adjustment >24"
Metal Bandsaw
- Recommended for stock <3/4"
- Maximum Throat <12"
Mini Lathe
- Maximum Throw: 7"
- Maximum Length: 12"
- Spindle RPM: 50-1200
Mini Mill
- 6" Machinist's Vise
- Power travel in X axis
- Spindle RPM: 100-2400
Tormach 1100MX (Coming Soon)
- 8" Machinist's Vise
- Spindle RPM: 50-10000
- Positional 4th Axis & Lathe 4th Axis
- Volume: 18 x 11 x 16.25 in
- Automatic Tool Changing and Probing
