Voxel (3lb)
Voxel is a 2WD vertical spinner 3lb robot based out of Plum, Pennsylvania. Voxel has been competing on the Eastern side of the United States since mid-2019 and is currently on version 2.3.
Robot Facts
| Driver | Michael Schorr |
| Weight Class | 3lb |
| Body Material | 6061 Aluminum, Carbon Fiber, TPU |
| Weapon | Vertical Beater Bar |
| Weapon Drive | 2845 Brushless Inrunner |
| Drive | Brushed Nerf Motors + 22mm Planetary Gearbox |
| Power | 3s LiPo |
Voxel has been competing on the Eastern side of the States since summer 2019, making appearances at SWORD, Motorama, and now Norwalk Havoc. Voxel's first design was a 2WD drum spinner with a UHMW frame and Garolite and printed PLA armor. The design did well and had much room for potential but suffered from a number of reliability issues, namely pinion gears slipping on the drive motors and traction on unpainted floors. The weapon itself was great at winning weapon-to-weapon exchanges, but due to the poor tooth geometry and high weapon speed it was rather bad at transferring energy into the opposing robot.
Version 2 of Voxel was designed after Motorama 2020 with the goal of resolving all of the design issues listed above. The design was finished around mid-May and the build turned into a fun little quarantine project.
The frame was upgraded from 3/8" UHMW plastic to 1/4" 6061 Aluminum for added rigidity and the top and bottom armor panels are now 2mm carbon fiber. These two materials combined result in a very rigid and a frame that is much stronger than the previous version. The old drum was scrapped and a newer, wider and more aggressive beater was designed. The new weapon is a few ounces lighter than the drum, but features a much improved tooth profile and is single-toothed, meaning it should bite much better than before. A larger weapon motor was swapped out and more reduction was put on the weapon for a lower top speed but higher low-end torque and faster spinup time. Apart from the weapon motor, most of the internals remained the same with the exception of the receiver. The last major change was new foam wheels that replaced the old BaneBots wheels for weight savings and hopefully improved traction and durability.
Tournament Results
2020
| NHRL January | Did Not Compete |
| NHRL July-1 | Did Not Compete |
| NHRL July-2 | Did Not Compete |
| NHRL September | Did Not Compete |
| NHRL November | 3 Wins - 2 Losses |
Voxel went 3-2 at Norwalk in November, going 3-0 in the winner's bracket before suffering 2 consecutive losses and ultimately tying for 9th place out of 51 competitors. The biggest issue of the event was traction, the Norwalk floor was slipper than anticipated and our process for applying latex to the foam wheels wasn't suited well for anything other than the nice, grippy, painted plywood we had in our test box. Other issues included a cracked weapon, dented weapon shaft from the needle bearings and poor armor material choice. All of these issues are being resolved and fixed as this is being typed and will be tested at Norwalk in February!
Combat History
- Norwalk Havoc November 2020 - 3 Wins, 2 Losses, T-9th
Non NHRL Events:
- Raymour & Flanigan Robot Fights 2019 - 1 Win, 2 Losses
- SWORD Fall 2019 - 2 Wins, 2 Losses, T-8th
- Motorama 2020 - 3 Wins, 2 Losses, T-17th
