Razor Storm: Difference between revisions

From NHRL
Content added Content deleted
(I filled in some info about my bot!)
(Added more info about my bot.)
Line 1: Line 1:
Razor Storm is a Vertical Spinner and Lifter 3lb Robot. It borrows many components from its predecessor ProtoStorm, including the blade and much of the chassis. Most of the bot is hand-machined save for the blade and pulley.
Razor Storm is a Lifter w/ Vertical Bar Spinner 3lb Robot.


Razor Storm gains a new paint stripe every competition.


* <u>Razor Storm V1.1:</u> The original Razor Storm had one aluminum wedgelet. Only one lifting arm was connected to the servo, the second was connected by two pieces of Garolite. It had an alternative "light" configuration that replaced the wheel guards with smaller front shields.
* <u>Razor Storm V1.2:</u> The next version had both lifting arms attached to the servo via a bracket and had no Garolite pieces connecting them.
* <u>Razor Storm V1.3:</u> For the finals, Razor Storm brought stronger lifting arms and a long UHMW wedgelet in place of the old aluminum one. It also brought an alternate configuration with "keep-away sticks" instead of forks on the arms. This was specifically designed to fight [[Billy]].


===Robot Facts===
===Robot Facts===
Line 13: Line 17:
| Body Material || UHMW, Polycarbonate, Garolite
| Body Material || UHMW, Polycarbonate, Garolite
|-
|-
| Weapon || Lifter w/ Vertical Bar Spinner
| Weapon || Vertical Spinner & Lifter
|-
|-
| Weapon Drive || Brushless Inrunner
| Weapon Drive || Brushless Inrunner
Line 34: Line 38:
|-
|-
| NHRL September 19th 2020 || 3 Wins - 2 Losses
| NHRL September 19th 2020 || 3 Wins - 2 Losses
|-
|NHRL November 21st 2020
|0 Wins - 2 Losses
|}
|}



Revision as of 01:12, 26 May 2021

Razor Storm is a Vertical Spinner and Lifter 3lb Robot. It borrows many components from its predecessor ProtoStorm, including the blade and much of the chassis. Most of the bot is hand-machined save for the blade and pulley.

Razor Storm gains a new paint stripe every competition.

  • Razor Storm V1.1: The original Razor Storm had one aluminum wedgelet. Only one lifting arm was connected to the servo, the second was connected by two pieces of Garolite. It had an alternative "light" configuration that replaced the wheel guards with smaller front shields.
  • Razor Storm V1.2: The next version had both lifting arms attached to the servo via a bracket and had no Garolite pieces connecting them.
  • Razor Storm V1.3: For the finals, Razor Storm brought stronger lifting arms and a long UHMW wedgelet in place of the old aluminum one. It also brought an alternate configuration with "keep-away sticks" instead of forks on the arms. This was specifically designed to fight Billy.

Robot Facts

Razor Storm
Driver Jamie Reilly
Weight Class 3lb
Body Material UHMW, Polycarbonate, Garolite
Weapon Vertical Spinner & Lifter
Weapon Drive Brushless Inrunner
Drive Brushed Gear Motor
Power 850 Mah 4S Lipo

Tournament Results

2020

NHRL January 18th 2020 Did Not Compete
NHRL July 18th 2020 Did Not Compete
NHRL July 19th 2020 Did Not Compete
NHRL September 19th 2020 3 Wins - 2 Losses
NHRL November 21st 2020 0 Wins - 2 Losses

Combat History

  • Fifth/Sixth Place - NHRL September 19th 2020